Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Cincinnati milacron arrow 750 CNC Retrofit

Dear CNCmakers,


1.       Please quote the cost of a retro fit package for a Cincinnati Arrow 750 machine.

2.       What warranty do you provide?

3.       Cost of shipping to the UK?

4.       Do you have a representative in the UK or close by in Europe?

5.       Is there a possibility of making the CNC retrofit 1 phase electric (230v 50Hz AC)?


Also please state the axis motor sizes and the control you would recommend. The Z axis on this model was too weak from the manufacturers when the machine was new so I would like to ensure the Z axis is very powerful.

I generally program the machine via a CAM system, so communication between my PC network and the control must be good.


CNCmakers Support:

Thanks for your email, following you may find our answers as requested.
1- Please refer to attached proforma invoice.
2- One year.
3- $148 by sea shipping.
4- We have no representative in the UK or close by in Europe.
5- We have no 1 phase option, only 3 phase, is 415V/3phase input power available there?
6- Following you may find CNC retrofit package for Cincinnati Arrow 750 as requested:
218MC-H Machining Center Controller   1 set
(CNC controller for milling machine with 3 axis simultaneously plus 1 spindle)
AC Servo Motor with Driver for X and Y axis 6NM  2 sets
(Servo Motor+driver+cables+connectors,1.5KW,6Nm,2500rpm,7A,130mm Support)
AC Servo Motor with Driver for Z axis 7.5NM   1 set
(Servo Motor+Brake+driver+cables+connectors,1.88KW,7.5Nm,2500rpm,7.5A,175mm Support)
AC Servo Spindle Motor with Driver 7.5KW   1 set
(Servo Spindle Motor-driver+cables+connectors,7.5KW, max. 7000rpm) 
All Cables(6 meters), Software & Manuals  1set
7- Here we use Master CAM, the communication between my PC network and the control is good.


—[Close]— —[ Back]— —[ Print]—