Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Deckel FP4 MA Retrofit

 

 

Deckel FP4 MA owner:

I have an old Deckel FP4 MA with a damaged control. Can i use this kit also for an FP4 MA?

You can use the 24Nm motor for the 3 axis and a 4.7kw motor for the spindle to calcullate.

 

 

CNCmakers Support:

Following you may find our CNC retrofit package for Deckel FP4 MA as requested.

 

Milling Machine CNC Controller   1 set

(CNC controller for milling machine with 3 axis simultaneously plus 1 spindle)

 

AC Servo Unit for X and Y axis 30NM  2 sets

(Servo Motor+driver+cables+connectors, 6KW,30Nm,2500rpm,27.5A,175mm Support)

 

AC Servo Unit for Z axis 30NM with brake   1 set

(Servo Motor+Brake+driver+cables+connectors, 6KW,30Nm,2500rpm,27.5A,175mm Support)

 

AC Servo Spindle Unit  5.5KW   1 set

(Servo Spindle Motor-driver+cables+connectors, 5.5KW, max. 7000rpm)

 

All Cables(8 meters), Software & Manuals  1set


—[Close]— —[ Back]— —[ Print]—