Processing using Baoji VMC850L machine tool with GSK 218MC system;

Processing material 316 forged steel, processed according to the drawings (respectively processing features such as 3, 5.5, 6, 8, 8.5, 10.5, 12, 15, 18 and other deep holes, threads, fine holes)

 

 

 

 

 

 

 

 

 

solution

 

Draw 3D models according to customer drawings, formulate processing strategies and process processing procedures;

Prototype one in six steps;

It is recommended that the processing machine be equipped with a spindle center water outlet function and a hydraulic brake 4th axis rotary table;

For mass production, use a stainless steel center drill bit for drilling, ￠ 15,18 use U drill for drilling, G3 / 8, G1 / 2, M20x1.5, M27x2 for milling with thread milling cutter (mill cutter), some features on the figure Processing with forming knife;

The shape adopts ordinary face milling to process hexahedron and chamfer;

The front (large hole surface), left and right sides, using a VMC850L machine tool + 4th axis rotary table, once clamping, 3 sides do one process;

On the back, top and bottom, a VMC850L machine tool + 4th axis rotary table is used for one-time clamping, and 3 sides are processed in one process.

 

 

 

 

 

 

 

 

 

Application effect

 

The processing size is qualified according to the drawings, and the processing finish meets the requirements for the use of parts.