How to set spindle speed on GSK980TTi

Products Catalogue

ppr fittings-NF-4011-Newsun Industry Co., Ltd

How to set spindle speed on GSK980TTi CNC

GSK980TTi User:

How to set up parameter for spindle speed.

We look at manual book to set up, but can not run the spindle.

We used inverter Cutes CT 2000 FG.

Maybe must be any convert analog signal to inverter?

CNCmakers Support:

You can change Parameter No. 001 BIT4 = 1, this is for spindle speed module voltage control.

—[Close]— —[ Back]— —[ Print]—