Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Manual milling machine CNC retrofit





The ordinary milling machine was changed to a CNC milling machine, and the tool magazine was added for automatic tool change;
 
2 long axis workpiece, processing length 2300mm, original machine line
 
The distance is only 1600mm;
 
3External milling, drilling, tapping, engraving and indexing are all
 
Fabric processing.
 
solution
 
X/Y/Z modified ball screw feed mechanism;
 
Extend the worktable and guide rail support, the X-axis stroke is increased to
 
2300mm
 
Remove the original spindle box, redesign the spindle box and replace the spindle;
 
Install a disc-type tool magazine, a CNC turntable, and an electric spindle at the outer end of the tailstock headstock, high-speed engraving and milling scales
 
Configure GSK218 CNC system.


—[Close]— —[ Back]— —[ Print]—