CNC Retrofit Package for Mitsubishi lathe MTC-10 
Turning machine CNC controller 980TDc 
AC Servo Unit for X axis 175SJT-MZ220B with brake 
AC Servo Unit for Z axis  175SJT-M300B 
AC Servo Spindle Unit 15KW 
All Cables(6M), Software & Manuals 

 

 

 

Mitsubishi lathe MTC-10 Retrofit User:
We have another question:
 
For each set of
AC Servo Unit for X axis 175SJT-MZ220B with brake  1 set
(Servo Motor+BRAKE+driver+cables+connectors, 3.5KW,22Nm,1500rpm,17.5A,175mm support)
We need to know the value of resistors for dynamic brake in ohms, and type of connection (series or parallel)
 
AC Servo Unit for Z axis  175SJT-M300B 1 set
(Servo Motor+driver+cables+connectors, 4.7kW,30Nm,1500rpm,24A,175mm support)
 
We receiving  4 pieces of resistors (a pair of 35 ohms 1500 watts,  and another set of 10 ohms /1200 watts)
There are for axis or spindle? Or both?
Can you share us a detailed schematic connections?
We are waiting your kindly response

 

CNCmakers Support:
1) GS2100T-NP1 need to connect one unit 10ohm/1200 watts resistor, connect to P and B end.
2) another GS2100T-NP1 need to connect one unit 10ohm/1200 watts resistor, connect to P and B end.
3）GS4150Y-NP2 need to connect two units 35ohm/1500 watts resistors, in parallel，connect to P and B end.