Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Products > CNC Controller(System) >

GSK218MC CNC Control System

GSK218MC CNC Milling Controller 

 

Product Type Structure LCD Size
GSK218MC Integral 10.4 inch
GSK218MC-U1 Integral 8.4 inch
GSK218MC-H Horizontal 8.4 inch
GSK218MC-H2 Horizontal 10.4 inch
GSK218MC-V Horizontal 10.4 inch

218MC_Milling_Machine_&_Machining_Center_CNC_Controller.pdf

GSK218MC, GSK218MC-U1, GSK218MC-H, GSK218MC-H2 and GSK218MC-V from CNCmakers are a upgrade products, it is widespread CNC system (matched with machining center and general milling machine) ,employed with 32-bit high performance CPU and super-large-scale programmable device FPGA, real-time control and hardware interpolation technology to ensure the system gets the high efficiency with the um-level precision, and its PLC can be edit on-line, which makes the logic control function become more flexible and strong. GSK218MC-H with 8.4'' color screen while GSK218MC and GSK218MC-V with 10.4'' color screen, more easy for operation and suitable for milling, carving, machining center, grinding or even gear hobbing.
 
 
 
 
1.The standard configuration is 4 axes and three links, and the rotary axis is determined by the parameter, and can be adapted with 4 axes link;
2.Max. traverse speed reaches 30m/min, max. feedrate reaches 15m/min;
3. Linear, exponential and S acceleration/deceleration is optional;
4.Pitch error compensation, backlash compensation, tool length compensation, tool wear compensation and tool nose radius compensation;
5. Convenient management with multilevel operation password;
6. Chinese and English display window selected by the parameter
7. 56M program memory capacity to store 400 programs and back stage edit function;
8. standard RS232 and USB interface to realize the bidirectional transmission of programs, parameters and PLC programs between CNC and PC;
9. DNC control and its baud rate can be set, up to 115200;
10. Embedded PLC can realize the various of logic control functions; its ladder can be edit , uploaded and downloaded on-line;
11. standard 48 input/48 output interfaces, I/O can be extended(optional function);
12. Auto/Manual switch by manual interference function;
13. MPG interrupt and Step interrupt function can execute the translation of coordinate system in the course of automatically running;
14. Edit programs can be executed in automatically running;
15. Rigid tapping and soft tapping are set by the parameter;
16. Three-gear shifting function, switch frequency conversion output voltage in max. spindle speed according to the corresponding gear;
17. Rotary, scale, polar coordinates and many kinds of fixed cycle function; 
18. Index information function to be convenient to operation and maintenance;
19. History alarm and operation log to be convenient to maintenance.
 
 
 
 
Controlled axes
Controlled and linked axes: up to 4 feed axes, one spindle, 3linked axes
Interpolation method: positioning (G00), linear (G01), arc (G02, G03), helical interpolation
Max. stroke: metric: ±9999.9999mm, least input increment:0.0001 mm
            Inch: ±9999.9999inch, least input increment:0.0001 inch 
Electronic gear: command multiplication coefficient 1~255, command division coefficient 1~255
Traverse speed: max. 30m/min
Rapid override: F0, 25%, 50%, 100% real-time adjustment
Cutting feedrate: max. 15m/min (G94) or 500.00mm/r (G95)
Feedrate override: 0~150% divided into 16 levels to real-time adjustment
Manual feed override: 0~150% divided into 16-level to real-time adjustment
MPG feed: 0.001mm, 0.01mm, 0.1mm
Single step feedrate: 0.001mm, 0.01mm, 0.1mm
Acceleration and deceleration
The post acceleration and deceleration can be controlled in Manual mode, and the linear or exponential acceleration and deceleration, and the acceleration and deceleration time constant can be set.
MPG mode can select the instant stop and complete run, and the latter is for the acceleration and deceleration after interpolation, can select the linear or exponential acceleration and deceleration, and the acceleration/deceleration time constant can be set.
Positioning (G00) can select the linear or deflection positioning. The acceleration/deceleration before/after interpolation is optional. The acceleration/deceleration before interpolation is for the linear or S type, and the ones after interpolation is for linear or exponential. And the acceleration/ deceleration time constant can be set.
The system can pre-read most 15 blocks to foreknow the path and speed to get the high speed and smooth of small block, at the same time, it can select Hermit spline interpolation function, applied to the mold machining. The acceleration/deceleration before/after interpolation can be selected in the cutting. The acceleration/deceleration before interpolation can select the linear or S ones, the acceleration/deceleration after interpolation can select the linear or exponential ones, and the acceleration/deceleration time constant can be set.
M command
Miscellaneous function M: Specified by the sequential 2 digits after address M.
Special M commands (cannot be defined again): end of program M02, M30; program stop M00; optional stop M01; subprogram calling M98; end of subprogram M99.
M codes are defined by the standard PLC: M03, M04, M05, M08, M09, M10,M11, M12, M13, M16, M17, M19, M21, M22, M32, M33
G command
77 kinds of G command: G00, G01, G02, G03, G04, G10, G11, G15, G16, G17, G18, G19, G20, G21, G22, G23, G24, G25,G26, G27, G28, G29, G30, G31, G33, G34, G35, G36, G37, G38, G39,G40, G41, G42, G43, G44, G49, G50, G51, G53, G54, G55, G56, G57, G58, G59, G60, G61, G62, G63, G64, G65, G68, G69, G73, G74, G76, G80, G81, G82, G83, G84, G85, G86, G87, G88, G89, G90, G91 G92, G94, G95, G96, G97, G98, G99
T command
Tool function: ●T2 digists●256 group tool offset ●tool position offset● tool length compensation ●tool nose radius compensation ● communication input of tool offset value● tool length measurement
Spindle speed control
Spindle function S: ●S 2 digits(I/O gear input and output)/ S 5 digits(analog output)●max spindle speed limit ● constant surface speed
Spindle encoder: resolutions can be set (100 p/r~5000p/r)
Transmission ratio between encoder and spindle (1~255):(1~255)
Automatic compensation
●Storage bidirectional compensation of pitch error: compensation points can be set. It is used for compensating the error resulted by machine position (such as the pitch error of the feed screw) to improve the machining precision. The compensated data as parameters are stored in storage.
●Backlash compensation: it can set the machine’s momentum loss compensated by the fixed frequency or acceleration/deceleration.
Tool length compensation: it is done by the specified G code (G43,G44,G49); the vertical plane can be selected by parameters.
●Tool nose radius compensation (G40,G41,G42): C tool compensation
Max. compensation value: ±999.999mm or ±99.9999inch.
Reliability and safety
●emergency stop;●overtravel;●stored stroke limit;●NC ready signal;●servo ready signal ●MST completion signal;●automatic run start light signal;● automatic running signal;●feed hold light signal
NC alarm: ●program or operation error;●overtravel error;●servo system error;●connection error, PLC error;●storage(ROM and RAM)error;over 300 alarms classified into 5 categories to provide the stable operation and rapid troubleshooting for the system.
Historic alarm and operation record
Self-diagnosis function to check the followings: ● system abnormity;● position control abnormity;● servo system abnormity;●RS232 reading abnormity;● PC data transmission abnormity and so on.
Operation function
● dry run ● interlock ● single block ● optional block skip ● Manual absolute ON/OFF ● M.S.T. lock
● machine lock ● feed hold ● cycle start ● emergency stop ● external reset signal ● external power ON/OFF● Manual continuous feed ● incremental feed ● MPG ● skip ●additional optional block skip ● sequence number search ● program number search ● external data input ● program restart ● menu switch ● graphics display● MPG interruption
Display
●10.4 inch 640×480 chromatic LCD● machine coordinates, absolute coordinates, relative coordinates, residual movement
● User program ● current operation mode ● system parameter, diagnosis number, alarm number, macro variables, tool offset setting, MDI commands, MST
State ● actual feedrate, spindle speed ● machining path display ● real-time wave diagnosis
●System running time and other NC commands and state messages
Program edit
Program capacity: 56M, max. 400 programs, customer macro calling and 4-level subprogram built-in are available
Background edit, absolute, relative coordinate and complex coordinate programming are supported
PLC function
Control mode: cycle run; processing speed: 3μs/per basic command; max. 3000 steps
I/O unit :input point/output point: 48/48, expandable
Development method: PLC commands or ladder
Command amount: 40 including 10 basic commands, 30 functional commands
DNC function ALCE
Serial DNC, and the baud rate can be set
Communication
Standard RS-232 and USB interface
Bidirectional transmission of programs, parameters and ladder between CNC and PC
Optional drive
DA98 series digital AC servo drive unit or DY3 series stepper drive unit withinput pulse and direction signal
 
 
Ordering Type and Configuration
Ordering Type
 

Type
Spec.
Remark
GSK 218MC-XX1
Standard configuration for four-axle and three-linkage
The rigid tapping can be realized when the DAP03 which in our company is applied.
GSK 218MC-XX2
Optional configuration for four-axle and four-linkage
With flexible tapping function

 
GSK218MC Configuration
 
Unit Configuration

Name
Configuration Type
Explanation
GSK218MC System unit
Standard
32-digit high capability CPU and grand scale programmable elements FPGA
MPG unit
Optional
PSG pulse (Changchun Sanfeng)
Electronical mini MPG
Optional
Changchun ZGB-3-001-100
Electronical big MPG
Optional
Changchun LGF-001-100

 
Cable Configuration

Name
Standard Configuration
Q’ty (pcs)
Length (m)
Remark
DNC interface connection cable
Standard
1
3
 
Matching spindle conversion signal cable
Optional
1
3
The conversion signal cable is cancelled and the spindle signal cable is changed into standard configuration when our appreciated customer uses the servo drive unit of spindle for our company. The signal connection cable of DAP01 and DAP03 are different, the signal cable must be indicated when the optional configuration is applied.
Matching spindle servo drive signal cable
Optional
1
3
Feed axis and control axis signal cable
Standard
3
3
The selection of control signal cable depends on the drive unit.
I/O system input signal cable
Optional
3
3
When the standard configuration I/O pin-board is applied, the I/O signal cable is changed into I/O pin-board standard configuration cable; when the optional configuration I/O pin-board and I/O signal cable are not applied, three of DB25 male bonding wire and three of DB25 female bonding wire are standard configuration.
I/O system output signal cable
Optional
3
3
Electronical MPG cable
Optional
1
0.3
When the optional configuration electronic MPG is applied, it is changed into standard configuration.

 
 
Attachment Configuration

Attachment Name
Configuration Type
Q’ty (pcs)
Remark
Lenovo(T108)
Optional
1
Capability 128M
Lenovo(B210)
Optional
1
Capability 256M
Lenovo(T160)
Optional
1
Capability 2G
I/O pin-board (input)
Optional
1
With input 1, 2 and 3
I/O pin-board (output)
Optional
1
With output 1, 2 and 3
Additional operation panel
Optional
1
Referring to the appendix panel figure for details
Without auto-lock button: KH-516-B11 (green or red)
Optional
4
It is used for power on, power off, feed hold and cycle start for the system
Key switch
Optional
1
Program lock
ESP button: LAY9-02ZS/1
Optional
1
 
DB9 male bonding wire socket (with rubber shell)
Standard
1~2
One for electronic MPG, two for the external MPG
GSK218MC programming and operation manual
Standard
1
 
GSK218MC installation and connection manual
Standard
1
 
 

New GSK218MC Ethernet User Manuals:

GSK218MC_Ethernet_Programming_&_Operation_Manual.rar


GSK218MC_Ethernet_PLC_&_Installation_Connection_Manual.rar

GSK218MC user manuals:

GSK218MC_CNC_Milling_Controller_Programing_And_Operation_Manual.rar

GSK218MC_CNC_Milling_Controller_Connectiong_And_Installation_Manual.rar

Communication_and_Ladder_Edit_Software_of_GSK218MC

CNC Retrofit Kit


—[Close]— —[ Back]— —[ Print]—