Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
主页 > Products > CNC Controllers for Milling >

K2000M

 K2000M is a new generation of high-end CNC milling and machining center system. It adopts newly upgraded software and hardware, can realize 0.25ms interpolation cycle, and has high-speed response capabilities, such as 3D solid graphics, multi-mode tool setting, high-speed high-precision and off Various control functions such as point control, the maximum number of control axes is 3/4/8 axis, can be equipped with KND company high-speed servo unit and absolute encoder motor, suitable for various high-performance CNC milling, vertical, horizontal and gantry machining centers machine tool

 

 

3-axis / 4-axis / 8-axis milling machine, machining center control, axis name and axis type can be customized.

 

l With horizontal and vertical two new process structures, strong anti-interference ability, high reliability and low failure rate.

 

l Use TFT color LCD screen, resolution 640 × 480, with 8.4 inches and 10.4 inches.

 

l The system interpolation cycle is 0.25ms, and the control accuracy is 1μm and 0.1μm.

 

l It has a processing capacity of 1000 instructions per second, which can realize high-speed processing of small line segments.

 

l Digital interface and analog interface can be expanded through CAN bus, DI / DO can be expanded to 512/512 points.

 

l The highest rapid speed can reach 240m / min (control accuracy 1μm), the highest feed speed can reach 60m / min (control accuracy 1μm).

 

l Using electronic disk technology, data is stored in multiple locations, and can be quickly recovered after an error.

 

l Optional pairing tool can be selected, and it has rich tool setting functions, such as centring tool setting, three-point centering tool setting and incremental offset coordinate system function.

 

l It has international standard G code compatible with FANUC system instructions, Chinese / English operation interface, complete help information and easy programming and operation.

 

l Configure U disk interface, with U disk backup and recovery system software and data function, U disk DNC processing function, U disk expansion program storage space function.

 

l It has an open PLC to meet the needs of secondary development. The PLC axis function can realize PLC control of coordinate axes, worktables, servo tool holders and other peripheral devices.

 

l Has rich software control functions, macro program B, local coordinate system, machine tool coordinate system, additional workpiece coordinate system, coordinate system rotation, polar coordinates, spiral lines, etc.

 

l Has rich system control functions, high-speed and high-precision functions, 3-dimensional graphic display function, breakpoint management function, front acceleration and deceleration control function, limited time protection function, pitch error compensation function, reverse gap compensation function, multi-stage MDI function, boot , Parameters, program password protection, etc.

 

l Can configure a variety of peripherals, such as absolute encoder (no need to turn on the zero and save the travel switch), servo spindle (spindle positioning and rigid tapping), etc.

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 


—[Close]— —[ Back]— —[ Print]—