GSK928TA Turning CNC System
ü Chinese/English LCD display, easy to operate
ü Additional Y Axis
ü Random curve interpolation realizes conic machining
ü Parameter programming suitable for special purpose
ü 15 kinds cycle dictate convenient to program
ü Actual adjustable feed speed ratio
ü Changeable speed-up/down time fitting in with step or servo driver
ü M/S/T hand button, optional electronic handwheel.
SPECIFICATION:
|
CPU
|
80C196+8032
|
Display
|
160×128 Lattice LCD
|
|
Controllable Axes
|
3 axes（X、Z、Y）
|
Linkage Axes
|
2 axes（X、Z）
|
|
Min Unit
|
0.01mm（X axis: diameter）
|
Max travel
|
±99999.99mm
|
|
Max Move Speed
|
18000mm/min (actual speed, limited by driver and load, can be set by user with parameters)
|
|
Max Interpolation Speed
|
Linear: 4.5m/min Arc: 3m/min random Conic: 2.5m/min
|
|
Feed Ratio
|
0～150% 16 grades actual, adjustable
|
|
Hand Feed Speed
|
Max: 4.5m/min，8 grades speed is set by user with parameters
|
|
Auto Speed-up/down
|
Shifting time and start speed are set by user
|
|
Thread Function
|
Thread the single/multi end, metric/inch, linear/ tapping thread & end thread, and the tool-withdraw mark can be set.
Thread interval: 0.01～12mm(metric) 2.2～200teeth/inch(inch)
Max threading speed: 2.5m/min
|
|
User Programming
|
Storage: 28KB、100programs，ISO Code、relative/absolute coordinate complex programming, full-screen edit.
|
|
G Function
|
38 kinds G codes, inc. 15 kinds fixed/complex cycle dictates, parameter programming & conic interpolation dictates; read/write 2 points user input/3 points user output.
|
|
User Data Storage
|
Program, parameters, tool compensation and coordinate-holding at power lost
|
|
Communication
|
(Optional) RS232 interface for transmitting user program, parameters, datas of tool compensation between PC and this system.
|
|
Spindle Function
|
Spindle parameter-setup simulation control or 4 grades switch control, MDI/valid program dictate.
0~10V simulation control output, 2 grades controllable controllable converter spindle initiative/passiveness shift.
|
|
Tool Function
|
4~8 tool position, hand/program tool-exchanged, tool length compensation, 9 grades compensation data, getting up tool compensation from fix-point regulation/ trail-cut regulation.
|
|
Assistant Function
|
All positive/reverse rotation, stop of spindle, coolant and lubrication are controlled by hand/program
|
|
Hand Function
|
Continuous hand feed, single hand feed (7 kinds of step setup with parameters by user), defined coordinate fast move, 0.01/0/1mm 2 steps adjustable feed hand wheel (optional)
|
|
Operation Mode
|
Edit, automation, hand (JOG), dry run, communication, parameters setup
|
|
Overall Size
|
368×298×115mm/368×298×115mm(small/large)
|
|
Weight
|
5.0Kg
|
|
