GSK980TA Turning CNC System
GSK980TA Lathe CNC System from CNCmakers, is new upgrade economical system with more characters as follows:
l High-speed CPU, programmable PLD, hardware interpolation, real high-speed μm grade control
l Four layers mainboard, high integration, reasonable construction & techniques, super reliability
l English/Chinese LCD display, friendly interfaces, convenient operation
l Exchangeable speed-up/down time suitable for servo or step driver
l Adjustable electronic gear ratio
SPECIFICATION:
|
CPU
|
80C186XL12
|
DISPLAY
|
320×240 lattice LCD
|
|
Controllable axes
|
2 axes（X、Z）
|
Linkage axes
|
2 axes（X、Z）
|
|
Min. Setting unit
|
X axis: 0.0005mm
Z axis: 0.001mm
|
Min. move unit
|
X axis: 0.0005mm
Z axis: 0.001mm
|
|
Max travel
|
±9999.999mm
|
Soft travel limit
|
±9999.999mm
|
|
Max move speed
（0.001mm unit）
|
X axis: 3.8m/min
Z axis: 7.6m/min
|
Max move speed
（0.002mm unit）
|
X axis: 7.6m/min
Z axis: 15.2m/min
|
|
Feed speed per minute
|
1～7600mm/min
|
Feed speed/rotation
|
0.0001～500mm/r
|
|
Fast speed ratio
|
F0、25%、50%、100%
4 grades actual adjustable
|
Feed ratio
|
0～150%, 16 grades actual adjustable
|
|
Fast speed-up/down mode
|
Linear
|
Feed speed-up/down mode
|
Exponent
|
|
Interpolation
|
Linear/full-cycle arc
|
Electronic gear ratio
|
1～127/1～127
|
|
Thread function
|
Metric/inch line/taper/end thread,
with tool-withdrawal mark
|
Thread interval
|
0.0001～500mm
0.06～254000 teeth/inch
|
|
User program edit
|
Storage: 40 KB/63 programs, ISO code, relative/absolute coordinate complex programming, full-screen edit
|
|
G function
|
22 kinds G code, incl. 12 kinds fixed/complex circle; 8 kinds user macro dictate, read/write, 16 points input/6 points output
|
|
Subprogram,
Macro program
|
Double subprogram transfer; macro program transfer with M/S/T code (optional)
|
|
User data storage
|
Programs, parameters, tool compensation, coordinate-holding at power lost (no losable RAM)
Programs, parameters, tool compensation backup storage（Flash-EEPROM）
|
|
Communication
|
（optional）RS232 interface for commuting the programs, parameters, tool compensation data between this system & PC
|
|
Spindle function
|
Hand/program control, 2 or 4 grades spindle shifting
Optional: 0~10V simulate output to control inverter spindle. Actual adjustable 50%~120% spindle ratio, constant linear speed cutting.
|
|
Tool function
|
Controllable 4~8 tool position, hand/program tool-exchanged; tool length compensation, 16 groups tool compensation setup
Compensation brought at fixed point/trail-cut regulation
|
|
Assistant function
|
All positive/reverse rotation, brake, stop of spindle, coolant, lubrication can be controlled by hand or program, program controls the collet
|
|
Hand function
|
16 grades continuous adjustable hand feed, 0.001/0.01/0.1/1mm, 4 grades adjustable hand single step feed, 0.001/0.01/0.1mm, 3 grades adjustable handwheel feed (optional)
|
|
Operation mode
|
Edit, automation, input, hand (JOG), handwheel/single-step, return mechanic origin, return program origin
|
|
Others function
|
Machine lock, assistant function lock, dry run, single segment run, program lock, parameter lock, extend ratio switch (optional), extend emergency button/feed hold/ circle start switch (optional)
|
|
Overall size
|
420×260×136mm/420×320×136mm(small/large)
|
|
Weight
|
6.0Kg (incl. Switch power)
|
|
