We have retrofitted an Okuma LB15 CNC lathe with below CNC retrofit kit, replaced its original CNC control, AC servo motor & drives of X and Z axes, and the spindle motor & drive, here is the detail:

1)CNC system with 2 axes control

2)AC servo motor & drive for X axis(6NM, 1.5kw, 2500rpm)

3)AC servo motor & drive for Z axis (10NM, 2.5kw, 2500rpm)

4)3KVA SEGRAGATED TRANSFORMER from 380V/3phases to 220V/3phases

5)11KW AC servo spindle motor & drive (Max.7000rpm, 30min. power 15kw)

6)CABLES,SOFTWARE AND ALL MANUALS

CNC Retrofit Kit Brochure:

CNC_Retrofit_Kit

Customer feedback:

As the mechanical parts is still good, after change the CNC parts, the machine runs perfect, the cost is less than buy a China CNC lathe, good investment.

http://www.cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html

http://www.cncmakers.com/cnc/Tech_Support/CNC_retrofitting.html

http://www.cncmakers.com/cnc/Tech_Support/CNC_machine_retrofitting.html