CNC Retrofit in 2012

Hello CNCmakers Team,

I hope everyone at CNC Makers is doing good!

There are a few questions I hope you can help me with.

LATHE:

In 2012 I ordered a GSK 980TDB control and two servo motors to build a lathe. Order # CNC120821288.

Everything has been working great, you can see the lathe pictures below.

The control has ports and buttons for Y and 4th axis, I would like to add a Y axis and C axis servo spindle motor to my lathe.

- Is it possible to add the Y and C axis to this control?

- And can the control support a servo main spindle motor and a servo power tool motor?

Lathe:

This is the power tool slide I want to make, shown in cardboard for reference.

I designed the slide to fit 4 of these power tools, do you have any ER16 power tools like this?

The tool post will be replaced with a 6 station turret JLDS-0625 and moved back for clearance.

CNCmakers Support:

It is nice to hear from you again, my friend.

- Is it possible to add the Y and C axis to this control?

Yes, it is possible.

- And can the control support a servo main spindle motor and a servo power tool motor?

The control support a servo main spindle motor and a servo power tool motor

I designed the slide to fit 4 of these power tools, do you have any ER16 power tools like this?

We have no this ER16 power tools

The tool post will be replaced with a 6 station turret JLDS-0625 and moved back for clearance.

We have JLD6-0625 six position tool post at below page.