Change spindle motor from 1024 pulses

Products Catalogue

ppr fittings-NF-4011-Newsun Industry Co., Ltd

Change spindle motor from 1024 pulses to 5000 pulses

We have just change the Ac servo spindle motor ZJY265A-15BM-B3Y1 to new model ZJY265A-15BM-B3Y1

As the new motor is 5000 pulses encoder, the original motor is 1024 pulses, so we need change the GS3000 parameter to match the new motor.

1- To input PA0=8888, the driver parameter password.

2- Then change GS3000 parameter PA176=5000

3- Save the data, then power off, and power on again.

—[Close]— —[ Back]— —[ Print]—