DMG DMC63V vertical machining center CNC Retrofit

The original machine tool numerical control system (SIEMENS 810D system) cannot be used normally due to aging failure, the mechanical accuracy of the whole machine cannot meet the production requirements, the accuracy of the spindle is reduced, the tool change of the tool magazine is unstable; the pipelines such as lubrication, cooling, and pneumatic systems are aging;

Replace the supporting CNC system, replace the aging parts, and restore the precision and control functions of the machine tool.

solution

Numerical control system: GSK25iMb system (15-inch PC version, 5 axes and 4 linkages), supporting servo drive / motor;

Redesign electrical circuits and replace supporting electrical components;

Add 4th axis function;

Replace the linear guide screw, bearing and other parts; overhaul the spindle and tool magazine, grind the worktable surface to restore the accuracy of the machine tool;

Replace the parts and pipelines such as lubrication, cooling, pneumatic system, and restore the original machine control function.

Application effect

The processing time of this part is 7 minutes 22 seconds, and the overall processing time is 86 minutes, which is about 27% higher than the original processing time;

The surface finish has also been greatly improved, fully meeting customer requirements.