The scoring machine originated in the 1700s. The early scoring machine, known as a "little pendulum" by industry insiders, is an indispensable tool in the watch industry. Due to the rapid development of specialized CNC machine tools for processing clock parts, the early scoring machine Small in size, light in weight, and low in price, it is favored by companies in the watch industry and independent watchmakers. So far, it is often seen in some special industries. It has been centuries since the original clock lathe evolved to the current walking-center CNC lathe.

 

 

 

 

 

 

 

 The modernized core machine has a qualitative leap over the traditional CNC lathe in terms of processing efficiency and processing accuracy. Modern mainstream core walking machines mainly use two-axis arrangement of tools, which greatly reduces the processing cycle time. By shortening the tool exchange time between the gang tool and the opposed tool station, the overlap of multiple tool stations and the effective axis movement overlap function of the thread chip are realized. The effective axis movement overlap function of thread chips and the direct spindle indexing function during secondary processing can effectively shorten the idle running time.

 

 

 

 

 

 

 

 

 

   In the machining process of the clamping part of the spindle and the workpiece, the chip cutting tool has always played a very important role. It provides a strong guarantee for the constant machining accuracy. As far as the core machine market is concerned, 42mm is its largest processing diameter, and the number of control axes can reach up to 10 axes. This makes the core machine a great advantage in the precision shaft and small complex parts processing market. This series of machine tools can also be equipped with automatic feeding devices to realize fully automated production of a single machine tool, reducing labor costs and defective products in the production process, and is very suitable for the production of large quantities of precision shaft parts. Through continuous innovation, the walking machine can also be used as a cutting machine. This is a very user-friendly design, which greatly improves the application field of the walking machine.

 

 

 

 

 

 

 

 

 

It is also because the walking machine can complete all or most of the processing procedures at one time, thus greatly shortening the product manufacturing process chain. This way, on the one hand, it reduces the production assistance time caused by the change of the installation card, and also reduces the manufacturing cycle and waiting time of the tooling fixture, which can significantly improve the production efficiency; shorten the manufacturing process chain and reduce the equipment required for the product, as well as the tooling fixture The reduction in quantity, workshop area and equipment maintenance costs can effectively reduce the overall fixed asset investment, production operation and management costs; the reduction in the number of card installations avoids the accumulation of errors due to the conversion of positioning benchmarks. At the same time, most of the turning-milling composite processing equipment has the function of online detection, which can realize the in-position detection and precision control of key data in the manufacturing process, thereby improving the processing accuracy of the product.