GSK928TEa CNC system User:

We have a lathe machine with GSK928TEa system, it was working perfectly for about 4 days.

But today the spindle stopped during machining, X and Y axis stopped too at the same time, and there was E358 alarm showing on the GSK928Tea screen, we tried to remove the alarm, but the spindle was still not working.

Then we turn the power off for about 1 minute and restart the machine, the problem gone.

It happened 5 or 6 times for a day, what could be wrong?

CNCmakers Support:

E358 alarm means there could be problem for the spindle, please check every component.

If all of them are working fine, we could also change parameter P402_d6=1 to disable the alarm.