Error 16on the X axis drive GS2000

GS2000-175SJT-M300D(A2Y1)and CNC 218MC-H User:

Dear Sirs,

Kindly, we have Error 16on the X axis drive GS2000 controlled by the cnc 218MC-H .

This error happens sometimes, after the cnc is stopped for some time.

What could be the cause ?

Note that we replaced the X drive by a new one, because the old was burned.

Best regards

CNCmakers support:

Please find attached for Err-16.

GS2000-175SJT-M300D(A2Y1)and CNC 218MC-H User:

Kindly check below parameters on drive X , are they correct ?

Parameter axis X

PA01

PA03

PA11

PA15

350

PA16

400

PA17

1000

PA18

300

PA19

PA28

PA29

PA37

20000

PA52

300

PA54

3000

PA138

CNCmakers support:

The parameters seems fine.

Please kindly check the motor cable and the motor.

Or you can exchange motors to try, and see if the motor is broken or not?