FANUC is a company specializing in robotics and machine automation technology. Its servo motors and drives are widely used in the field of industrial automation. The following is a FANUC motor selection guide based on search results:

Image

1. Determine axis parameters
When selecting a FANUC motor, you first need to determine the basic axis parameters, such as axis size, weight, and motion mode. These parameters are essential for calculating the intermediate variables for motor selection1.

2. Calculate the intermediate variables for selection
Based on the basic axis parameters, you can calculate the intermediate variables for axis motor selection. These intermediate variables include but are not limited to load/motor inertia ratio, acceleration and deceleration torque, cutting load torque, etc.7.

3. Select the motor model
After completing the calculation of the intermediate variables, you can select the appropriate servo motor model in the FANUC product catalog based on the calculation results. FANUC servo motors have smooth rotation characteristics, excellent acceleration capabilities, and high reliability.

4. Consider the acceleration capability of the motor
When selecting a motor, you need to consider its acceleration capability. FANUC servo motors have excellent acceleration capabilities and can respond quickly to motion control instructions.

5. Pay attention to the inertia matching of the motor
The matching of motor inertia and load inertia is very important for the stability and accuracy of motion control. It is usually recommended to maintain a reasonable matching relationship between motor inertia and load inertia.

6. Consider the maximum torque of the motor
The maximum torque of the motor is an important selection parameter. It not only affects the acceleration and deceleration time constant of the drive motor, but also affects the overload capacity and continuous operation ability of the motor.

7. Check the product specifications and models
During the selection process, you can check the product specifications and models manual provided by FANUC to select the appropriate motor more accurately.

8. Consider the special functions of the motor
FANUC servo motor system can also adapt to load, emergency stop and other situations to ensure smooth and accurate motion control. In addition, some FANUC motors also have functions such as position tracking and servo shutdown.

Through the above steps, you can select FANUC motors more scientifically and reasonably. If you need more specific help, you can contact a professional FANUC maintenance and technical support service provider.