| G code |
Description |
| G00 |
Rapid traverse |
| G01 |
Linear interpolation |
| G02 |
Circular interpolation CW |
| G03 |
Circular interpolation CCW |
| G04 |
Dwell |
| G17 |
X Y plane selection |
| G18 |
Z X plane selection |
| G19 |
Y Z plane selection |
| G28 |
Return to reference position |
| G30 |
2nd, 3rd and 4th reference position return |
| G40 |
Cutter compensation cancel |
| G41 |
Cutter compensation left |
| G42 |
Cutter compensation right |
| G43 |
Tool length compensation + direction |
| G44 |
Tool length compensation – direction |
| G49 |
Tool length compensation cancel |
| G53 |
Machine coordinate system selection |
| G54 |
Workpiece coordinate system 1 selection |
| G55 |
Workpiece coordinate system 2 selection |
| G56 |
Workpiece coordinate system 3 selection |
| G57 |
Workpiece coordinate system 4 selection |
| G58 |
Workpiece coordinate system 5 selection |
| G59 |
Workpiece coordinate system 6 selection |
| G68 |
Coordinate rotation |
| G69 |
Coordinate rotation cancel |
| G73 |
Peck drilling cycle |
| G74 |
Left-spiral cutting circle |
| G76 |
Fine boring cycle |
| G80 |
Canned cycle cancel |
| G81 |
Drilling cycle, spot boring cycle |
| G82 |
Drilling cycle or counter boring cycle |
| G83 |
Peck drilling cycle |
| G84 |
Tapping cycle |
| G85 |
Boring cycle |
| G86 |
Boring cycle |
| G87 |
Back boring cycle |
| G88 |
Boring cycle |
| G89 |
Boring cycle |
| G90 |
Absolute command |
| G91 |
Increment command |
| G92 |
Setting for work coordinate system or clamp at maximum spindle speed |
| G98 |
Return to initial point in canned cycle |
| G99 |
Return to R point in canned cycle |
