| GSK980TDi CNC Controller User: Dear sir, the GSK 980TDi has err 50 as below, how can we solve it? GSK CNC 980TDi system init err:50; GUI init err CNCmakers support:
Put these 2 files in the root directory of an U disk, when the 980TDi is power off, plug in the 980TDi, and then power on, the 980TDi will automatically upgrade
What for about 10 minutes, turn off the power, unplug the USB flash drive, and power it on again
|
 |
| Products Catalogue | Home | About Us | Retrofit | Download | News | Tech Support | Contact Us | |
|
|
|
 |
