GSK928TC Crash due to Memory full

The GSK928TC lathe CNC controller crash due to the memory is full.

(This solution for Version V2.13 and V2.23 only)

Solution: Press the Return and Reset key simultaneously, then turn on the power, release the Reset key first and wait about 5 seconds, release the Return key after that.

Input M8000, press Return Key.

Then Input 0, press Return key, input 0 again and then press Return key again, repeat this procedure for 8 times.

Now enter the CNC program menu, delete the programs to release memory.

Upgraded new GSK928TEII lathe system speicification.

http://www.cncmakers.com/cnc/controllers/CNC_Controller_System/GSK928TEII.html