GSK980TDc User:
Hello CNCmakers, we have GSK980TDc has problem as attached photos.
GSK980TDc Bootloader VT4.52 WARNING CODE: 19 RTC ERROR!!!
GSK980TDc System Error Please restart
Can you help?
CNCmakers Support:
Is it GSK980TDc or GSK980TDc-V?
Please unplug all the connection of this GSK980TDc controller, and leave the controller power on alone, see if the problem still exist or not.
If the problem still there, it means the mainboard could have been corroded by oil or water, need to change a new mainboard.
  |
 |
| Products Catalogue | Home | About Us | Retrofit | Download | News | Tech Support | Contact Us | |
|
|
|
 |
