|
|
|
GSK 980TC3 CNC Alarm List
|
Alarm No. |
Content |
Remark |
|
0000 |
Parameter for cutting off power once is modified |
|
|
0001 |
File open fail |
|
|
0002 |
Data input overflow |
|
|
0003 |
Program number already in use |
|
|
0004 |
There is no address but figure or character "-”at the beginning of the block.
Modity the program |
|
|
0005 |
There is no appropriate data but another address or EOB code behind the
address. Modify the program |
|
|
0006 |
Sign ""”input is wrong (One or more "-”signs are input behind the address
where negative sign can not be used). Modify the program |
|
|
0007 |
Decimal point"." input is wrong (One or more "." signs are input in the address
where the sign can not be used). Modifty the program |
|
|
0008 |
The program file is too large. Please use CNC to transmit it |
|
|
0009 |
llegal address input. Modity the program. |
|
|
0010 |
Have used the unusable G doe or have commanded the G code which has no
the function. Modify the program |
|
|
0011 |
Feedrate is not specified or it is wrong in cutting feed. Modify the program |
|
|
0012 |
Disk space is not enough. Setup or add file is not alowed |
|
|
0013 |
The program files are up to the upper limit. New programs can not be setup |
|
|
0015 |
Exceed the number of simultaneously controlled axes |
|
|
0016 |
Current pitch compensation beyond range |
|
|
0017 |
No authority to modify |
|
|
0018 |
Dummy variable and local variable are not allowed to modify. G10 only to
modity parameter of user grade |
|
|
0020 |
In circular interpolation (G02 or G03), the distance between the Start point and
the circle center is not equal to the distance between the end point and the
circle center. The value beyond the one specified by parameter214 |
|
|
0021 |
In circular interpolation, axes which are not in the selected planes(G17, G18,
G19) are specified. Modify the program. |
|
|
0022 |
In circular interpolation, R (radius),1, J and k (distance from the start pointto
the center) are not be specified |
|
|
0023 |
In circular interpolation, I, J, K and R are specified together |
|
|
0026 |
Unsupported file format. It is too large or with above 1024 bytes |
|
|
0028 |
In plane selection codes, two or more axes are specified at the same direction.
Modify the program |
|
|
0031 |
When G10 sets an offset amount, a workpiece coordinate system and an
extemal workpiece coordinate system, P value is too big or is not specified |
|
|
0032 |
When G10 sets the offset amount or the system variable writes an offset
amount, the offset amount is too big or is not specifed. Modify the program |
|
|
0033 |
The intersecting point of offset C or chamfer is not confrmed. Modify the
program |
|
|
0034 |
Set-up or offset cancel are not allowed in circular command. Modify the
program |
|
|
0036 |
In tool compensation mode, have commanded the skip cutting (G31)。
Modity the program |
|
|
309 |
The plane selected by G17, G18 or G19 is changed in tool compensation C.
0037
Modify the program |
|
0038 |
In tool compensation C, overcut appears because the arc start point or end
pont is consistent with the arc center. Modify the program |
|
|
0039 |
Tool nose positioning error in tool compensation C |
|
|
0040 |
Cannot convert the workpiece coordinate system in tool compensation C.
Cancel the tool compensation before changing the workpiece coordinate |
|
|
0041 |
Interference occurs in tool compensation C leads overcutting. Modify the
program |
|
|
0042 |
Ten blocks with stop tool code are specified in tool compensation mode.
Modify the program |
|
|
0043 |
No authority. Change it in password page |
|
|
0044 |
In canned cycle, one of codes in G27, G28, G29, G30 is specified. Modify the
program |
|
|
0045 |
In canned cycle G73/G83, cutting depth (Q) is not specified or it is 0. Modify
the program |
|
|
0046 |
In 2nd, 3rd, 4th| reference retum codes, codes besides P2, P3 and P4 is
specified |
|
|
0050 |
Move it when changing canned cycle mode |
|
|
0051 |
Have specified a mistaken movement operation or movement distance in a
block following the cornering or chamfering. Modify the program |
|
|
0053 |
Wrong command format for rounding or chamfering. Modity the program |
|
|
0055 |
Chamfering movement failed |
|
|
0056 |
M99 shall not in the same block with macro code G65. Modity the program |
|
|
0057 |
File input filed. Cut off the power and resetit |
|
|
0058 |
In block of rounding or chamfering, specified axis is not in the selected plane.
Modify the program |
|
|
0059 |
Program number is not found in external program retrieving or it is edited in
background. Check program number or external signal, or stop background
editting |
|
|
0060 |
Specified sequence number is not found in retrieving. Check sequence
number |
|
|
0061 |
The 15t axis is not on the reference point |
|
|
0062 |
The 2nd axis is not on the reference paint |
|
|
0063 |
The 3u axis is not on the reference point |
|
|
0064 |
The 4"axis is not on the reference point |
|
|
0065 |
The 5" axis is not on the reference point |
|
|
0066 |
Cancel canned cycle mode before inputting parameter (G10) |
|
|
0067 |
G10 does not support the set format |
|
|
0068 |
Parameter switch is not switched on |
|
|
0069 |
Udisk operation page should be closed when machining |
|
|
0070 |
Insufficient memory. Delete unneeded programs and try it again |
|
|
0071 |
Have not found the required searched address or have not foundthe specified
program number's program in the program search. Check the data |
|
|
0072 |
Stored programs exceed 400. Delete unnecessary programs |
|
|
0073 |
Program number already in use. Change the program number or delete
unneeded program |
|
|
0074 |
Program number beyond the range 1-9999). Change the program number |
|
|
310 |
|
0075 |
To register a protected program number |
|
|
0076 |
Address P (program name) is not specified in block M98. Modifty the program |
|
|
0077 |
Program nesting exceed 5 layers |
|
|
0078 |
In blocks M98, G65, program name specified by address Pis not found or
macro program called by M06 does not exist |
|
|
0079 |
CNC expires the using date. Please contact the supplier |
|
|
0080 |
Input data is wrong, Max. speed is smaller than Min. speed or Min. speedis
bigger than Max. speed |
|
|
0081 |
Subprogram can not be called. Modify the program |
|
|
0084 |
Overtime or short circuit occurs in key |
|
|
0085 |
Overflow occurs when data is transmitted to memory by series port. Baud rate
setting or IO equipment is wrong |
|
|
0086 |
Planes can not be shifted in canned cycle mode |
|
|
0087 |
Alarm NO .0087-0091 are for reference point retum unfinished (starting point
of reference return is too close to the reference point or the speed is too slow). |
|
|
0092 |
G27(check for reference return) code can not return to the reference point |
|
|
0093 |
Motor model error |
|
|
0098 |
Afer power-on or emergency stop, when the program with G28, program
restarts without executing reference return |
|
|
0100 |
On parameter (setting) screen, PWE (parameter input is active)is setto 1.
Restart CNC after setting itto0. |
|
|
0101 |
Memory data disordered after power off, please ensure correct location |
|
|
0102 |
Driver motor does not match CNC |
|
|
0103 |
Bus communication error. Please check reliability of the cable |
|
|
0104 |
Machine zero point setting error |
|
|
0105 |
Time-out error while data is being fetched |
|
|
0106 |
Drive unit is not consistent with gear ratio of servo parameter |
|
|
0107 |
Drive unit parameter is not consistent with servo unit parameter |
|
|
0108 |
Please insert U-disk |
|
|
0110 |
Position data exceeds the allowed range. Please reset |
|
|
0111 |
Calculated result exceeds the allowed range (-1047 to -1029, 0 and 102 to
1047 ) |
|
|
0112 |
Zero (including tan900) is specified as a divisor |
|
|
0113 |
Unusable functional code is specified in user macro program. Modity the
program |
|
|
0114 |
G39 format error. Modify the program |
|
|
0115 |
Variable value can not be specified. O, N can not be specifed as variablesin
user macro program |
|
|
0116 |
A variable is on the left of the assignment statement, while value assignment
to it is not allowed. Modify the program |
|
|
0117 |
G10 online modification is not supported by this parameter. Please modify the
program |
|
|
0118 |
Nest exceeds the upper limit (5). Modify the program |
|
|
0119 |
Codes MOO M01 ,MO2,M3O,M98 M99,.M06 can not in a same block with other
M codes |
|
|
0120 |
Part of setting is restored |
|
|
311 |
|
0121 |
Machine coordinates and encoder feedback values exceed setting value of
error |
|
|
0122 |
Called nests of macro program exceed 5 layers. Modify the program |
|
|
0124 |
Program end ilelally,l without M30, M02, M99 or end sign. Modify the program |
|
|
0125 |
Macro program format error. Modify the program |
|
|
0126 |
Program cycle filure. Modity the program |
|
|
0127 |
NC coexists with user macro code statement. Modify the program |
|
|
0128 |
Sequence number in branch code is not at the range 0-99999, or the number
is not found. Modify the program |
|
|
0129 |
The address of argument assignment. Modify the program |
|
|
0130 |
PLC axis control code is input to the axis controlled by CNC, or opposite.
Modify the program |
|
|
0131 |
5 or more external alarm signals occur. Check the ladder diagram |
|
|
0132 |
The alarm of the external alarm signal does not exist. Check PLC |
|
|
0133 |
The system does not support axis code. Modify the program |
|
|
0135 |
The index angle of index table is not an ange unit's multiple. Modify the
program |
|
|
0136 |
In index table's indexing, it with B axis commands another axis. Modify the
program |
|
|
0137 |
Sequence number to be transferred by skip code is in loop body. Modifythe
program |
|
|
0138 |
Cycle statement is wrong or skip code enters loop body. Modify the program |
|
|
0139 |
PLC axis change disabled. Modifty the program |
|
|
0140 |
Sequence number does not exist |
|
|
0142 |
The propotion scaling override exceeding 1-999999 is commanded. Correct
the proportion scaling setting |
|
|
0145 |
G28 is commanded when a reference point is not established |
|
|
0148 |
The automatic corer deceleration speed exceeds the the judgement angle
range's setting value. Modify the parameter |
|
|
0150 |
Mistaken modal command |
|
|
0151 |
Blocks specified by P and Q have commanded the unusable commands in the
compound fixed cycle |
|
|
0160 |
Arc programming only by R in polar system |
|
|
0161 |
Reference point, plane selection or direction-related codes can not be
executed in polar coordinate mode |
|
|
0165 |
Please specify revolution, scaling or G10 codes in a single block |
|
|
0166 |
No axis specified in reference return |
|
|
0167 |
Intermediate point coordinate too large |
|
|
0168 |
The min. dwell time at the hole bottom should be shorter than the max. dwell
time |
|
|
0170 |
Tool radius compensation is not cancelled while entering or exiting
subprogram |
|
|
0172 |
Pis not an integer or less than 0 in a block clling subprogram |
|
|
0173 |
Subprogram call should be less than 9999 |
|
|
0175 |
Canned cycle can only be executedin G17 plane |
|
|
0176 |
Spindle speed is not specifed before rigid tapping |
|
|
|
|
0177 |
Spindle orientation is not supported by 10 control in G76 code. Modify the
program or parameter |
|
|
0178 |
Spindle speed is not specified before the canned cycle starts |
|
|
0181 |
Illegal M code |
|
|
0182 |
The spindle speed is too big or small |
|
|
0183 |
llegal T code |
|
|
0184 |
The selected too exceed its range |
|
|
0189 |
Uis too small, U should bigger than or equal to tool radius |
|
|
0190 |
V is too small or it is undefined. V should be bigger than 0 |
|
|
0191 |
W is too small or it is undefined. W should be bigger than0 |
|
|
0192 |
Q is too small or it is undefined. Q should be bigger than 0 |
|
|
0193 |
I is undefined oritis 0 |
|
|
0194 |
J is undefinedor itis 0 |
|
|
0195 |
D is undefined oritis 0 |
|
|
0198 |
In constant surface cutting speed control, specified axis error (see parameter
No.254) |
|
|
0199 |
Macro code modification program is not defined |
|
|
0200 |
In rigid tapping, ilgal S code |
|
|
0204 |
M29 should be specified in G80 mode. Modify the program |
|
|
0206 |
Plane shifting is specified in rigid tapping. Modify the program |
|
|
0208 |
This code can not be executed in G10 mode. Please cancel G10 mode first |
|
|
0210 |
The program restart file name is not consistent. Please select a correct file
name |
|
|
0212 |
ChamferorRis specified, orother axis is specified in plane. Modify the
program |
|
|
0213 |
Tool changing macro program does not support G31 skip. Modify the program |
|
|
0214 |
Tool changing macro program does not support skip operation |
|
|
0215 |
Tool changing macro program does not support modifying coordinate system
and tool compensation dynamically |
|
|
0219 |
MO6 Tool magazine is not used (parameter is not opened). Tool changing code
can not be used |
|
|
0220 |
Metric/inch switching is not supported by scaling, revolution and polar
coordinate mode |
|
|
0221 |
Metric/inch switching is not supported by tool changing macro program |
|
|
0224 |
Reference return is not performed before auto run started |
|
|
0231 |
There are following errors in the parameter input's specified format error:
1)N or R is not input
2) Parameter number is not defined
3)Address P is not defined in bit parameter input L50
4)N, P, Rexceed the range |
|
|
0232 |
3 or more axes are specifed as helical interpolation axis |
|
|
0233 |
Device connected to RS-232-C is being used |
|
|
0235 |
Specified record end sign (%) |
|
|
0236 |
Parameter setting of program restart is wrong |
|
|
|
|
0237 |
The command's decimal point which must be specified is not specifed |
|
|
0238 |
The same address in one block exists many times or two or more G codesin
the same group are in one block |
|
|
0239 |
An ilegal G code is specified in pre-reading control mode. In pre-reading
control mode, dividing spindle is specified, max. cutting feeding parameteris
set to 0 and interpolation pro-acceleration/deceleration parameteris setto0.
Set the parameter correctly |
|
|
0241 |
MPG pulse is abnormal |
|
|
0242 |
Bus connection error |
|
|
0250 |
Axis name repeated, please modify parameter NO.175~179 |
|
|
0251 |
Emergency stop alarm, perform zero return again after canceling the alarm |
|
|
0252 |
Program ends ilally (CNC transmission speed is low, please reduce
feedrate) |
|
|
0261 |
Pulse code of DSP interpolation axis is too big. Perform zero return again after
reset |
|
|
0262 |
DSP is not started. Please power on again |
|
|
0263 |
DSP parameter setting error |
|
|
0264 |
DSP alarm. Data is too big |
|
|
0265 |
DSP alarm. The bus can not be connected or bus initialization failure |
|
|
0266 |
Speed of DSP interpolation axis exceeds 200MMIN. Perform zero return
again after reset |
|
|
0267 |
DSP initial sign (5555) is abnormal. Perform zero return again after reset |
|
|
0268 |
DSP pulse output volume per revolution is too big. Perform zero return again
after reset |
|
|
0269 |
DSP internal alarm. Perform zero return again after reset |
|
|
0270 |
Length of DSP equally distributed interpolation point is too small |
|
|
0271 |
DSP received interpolation data is too small. Perform zero return again after
reset |
|
|
0272 |
DSP received unditinguishable G code |
|
|
0273 |
DSP hardware data interchange is abnormal (codes) |
|
|
0274 |
DSP hardware data interchange is abnormal (data) |
|
|
0275 |
In high-speed mode, interpolation multipleis 0 |
|
|
0280 |
Perform axes zero return before using tool setting function |
|
|
0281 |
Switch to [SET] [Halving] interface before using tool setting function |
|
|
0282 |
Please check whether tosetting gauge is installed or parameter 1.6 is set |
|
|
0283 |
Z axis exceeds safety position,please check tosetting gauge or tool length
setting_ |
|
|
0286 |
Automatic tool length measurement is wrong. Please measure it again |
|
|
0401 |
The drive alarm 01: the servo motor speed exceeds its setting value |
|
|
0402 |
The drive alarm 02: the main circuit's power supply voltage is too high |
|
|
0403 |
The drive alarm 03: the main circuit's power supply voltage is too low |
|
|
0404 |
The drive alarm 04: the numerical value of position deviation counter exceeds
its setting value |
|
|
0405 |
The drive alarm 05: the motor's temperature is too high |
|
|
0406 |
The drive alarm 06: the speed regulator satyrates for long time |
|
314
|
|
0407 The drive alarm 07: CCw, cW drive inhibiting input are OFF |
|
0408 |
The drive alarm 08: the numerical value's absolute value of position deviation
counter exceeds 230 |
|
|
0409 |
The drive alarm 09: the encoder signal is mistaken |
|
|
0410 |
The drive alarm 10: control power supply +15V is low |
|
|
0411 |
The drive alam 11: IPM faults |
|
|
0412 |
The drive alarm 12: the motor's current is too big |
|
|
0413 |
The drive alarm 13: the servo driver and motor are overload(instantaneous
overheat) |
|
|
0414 |
The drive alarm 14: the braking circuit fault |
|
|
0415 |
The drive alarm 15: encoder counter fault |
|
|
0420 |
The drive alarm 20: EEPROM error |
|
|
0430 |
The drive alarm 30: encoder z pulse eror |
|
|
0431 |
The drive alarm 31: encoder UVW signal error or it does not match encoder |
|
|
0432 |
The drive alarm 32: UVW with all high level or with all low level |
|
|
0433 |
The drive alarm 33: communication interrupted |
|
|
0434 |
The drive alarm 34: encoder speed is abnormal |
|
|
0435 |
The drive alarm 35: encoder state is abnormal |
|
|
0436 |
The drive alarm 36: encoder counter is abnormal |
|
|
0437 |
The drive alarm 37: single circle number of encoder overflow |
|
|
0438 |
The drive alarm 38: encoder counter overflow |
|
|
0439 |
The drive alarm 39: encoder battery alarm |
|
|
0440 |
The drive alarm 40: encoder battery's power shortage |
|
|
0441 |
The drive alarm41: motor model dismatched |
|
|
0442 |
The drive alarm 42: absolute position data abnormal alarm |
|
|
0443 |
The drive alarm 43: encoder EPPROM check alarm |
|
|
0449 |
Ethernet initialization failure. Please check hardware |
|
|
0450 |
Drive unit is disconnected. Please check whether connection of hardwareis
correct |
|
|
0451 |
The 15t axis driver alarm |
|
|
0452 |
The 2nd axis driver alarm |
|
|
0453 |
The 3'd axis driver alarm |
|
|
0454 |
The 4 axis driver alarm |
|
|
0455 |
The 5h axis driver alarm |
|
|
0456 |
Spindle driver alam |
|
|
0460 |
Exceed the machining cycle processedbyG71, G72, G73, G76, G90, G92,
_G94 |
|
|
0466 |
The path is non-monotonous: X direction |
|
|
0467 |
The path is non-monotonous: Z direction |
|
|
0500 |
The 15 axis soft limit - direction overtravel:(manual or MPG +direction
movement release). |
|
|
0501 |
The 15 axis soft limit - direction overtravel:(manual or MPG -direction |
|
|
|
movement release). |
|
|
0502 |
The 2 axis soft limit- direction overtravel:(manual or MPG +direction
movement release). |
|
|
0503 |
The 2md axis soft limit - direction overtravel:(manual or MPG -direction
movement release). |
|
|
0504 |
The 3daxissoftlimit- direction overtravel:(manual or MPG +direction
movement release). |
|
|
0505 |
The3"axissoft limit- direction overtravel:(manual or MPG -direction
movement release). |
|
|
0506 |
The 4”axis soft limit - direction overtravel:(manual or MPG direction
movement release). |
|
|
0507 |
The 4h axis soft limit - direction overtravel:(manual or MPG -direction
movement release). |
|
|
0508 |
The 5" axis soft limit 一direction overtravel:(manual or MPG direction
movement release). |
|
|
0509 |
The 5m axis soft limit 一direction overtravel:(manual or MPG -direction
movement release). |
|
|
0510 |
The 15 axis hard limit - direction overtravel:(manual or MPG +direction
movement release). |
|
|
0511 |
The 1s axis hard limit - direction overtravel:(manual or MPG -direction
movement release). |
|
|
0512 |
The 2nd axis hard limit - direction overtravel:(manual or MPG +direction
movement release). |
|
|
0513 |
The 2md axis hard limit . direction overtravel:(manual or MPG -direction
movement release). |
|
|
0514 |
The 3d axis hard limit 一direction overtravel:(manual or MPG +direction
movement release). |
|
|
0515 |
The 3d axis hard limit 一direction overtravel:(manual or MPG -direction
movement release). |
|
|
0516 |
The 4m axis hard limit - direction overtravel:(manual or MPG +direction
movement release). |
|
|
0517 |
The 4”axis hard limit - direction overtravel:(manual or MPG -direction
movement release). |
|
|
0518 |
The 5m axis hard limit - direction overtravel:(manual or MPG +direction
movement release). |
|
|
0519 |
The 5" axis hard limit-direction overtravel: (manual or MPG -direction
movement release). |
|
|
0600 |
The operation keyboard is not connected. Please check its connection cable |
|
|
1001 |
Address of relay or coil is not set |
|
|
1002 |
Function code of input code does not exist |
|
|
1003 |
Function code COM is not used correctly. Corresponding relationship between
COM and COME is wrong. or function cade is used between COM and COME |
|
|
1004 |
User ladder beyond the maximum permissible linage or step number. Reduce
NET number |
|
|
1005 |
Function commands END1, END2 do not exist; errors in END1,END2: or
END1,END2's sequence is not correct |
|
|
1006 |
Illegal output in the network. Please check the output format |
|
|
1007 |
PLC communication failure due to hardware failure or system interruption.
Please contact with the system device manufacture |
|
|
1008 |
Functional code is not linked correctly |
|
|
1009 |
Network horizontal line is not linked |
|
|
1010 |
Editing NET losses due to power-off in ladder editting |
|
|
Appendix2 Alarm List |
|
|
|
1011 |
Address or data format is not the one specified by this function. Input it again |
|
|
1012 |
Address or data is wrongly input. Input it again |
|
|
1013 |
llegal character or data defined |
|
|
1014 |
CTR address repeated. Reselect other unused TMR addresses |
|
|
1015 |
Functional code is wrongly used. Correspondence between JMP and LBLis
wrong. JMP is used again between JMP and LBL |
|
|
1016 |
Incomplete network structure. Change the ladder diagram |
|
|
1017 |
Unsupported network exists. Change the ladder diagram |
|
|
1019 |
TMR address repeated. Reselect other unused TMR addresses |
|
|
1020 |
No parameter in functional code. Input the legal parameters |
|
|
1021 |
PLC stops automatically by CNC when the PLC executes overtime. Please
check the ladder logic and resolve the endless loop or the overmuch retitive
calls |
|
|
1022 |
Names of functional code missing. Please input the name of functional codes |
|
|
1023 |
Address or constant of functional code parameter is out of range |
|
|
1024 |
Unnecessary relay or coil exists. Delete the unnecessary connection |
|
|
1025 |
Functional code output wrongly |
|
|
1026 |
NET link linage beyond the supported range. Change the ladder diagram |
|
|
1027 |
The same output address is used in another place. Reselect the unused
output address |
|
|
1028 |
File format wrong |
|
|
1029 |
File losses from ladder diagram being used |
|
|
1030 |
False vertical line in network. Delete the vertical line |
|
|
1031 |
Message data area is full. Please reduce COD code data list capacity |
|
|
1032 |
The first level of ladder diagram is too large to complete execution on time.
Reduce the first level of ladder diagram |
|
|
1033 |
SFT codes beyond the max. alowed number. Please reduce the usageamount |
|
|
1034 |
Functional code DIFU/DIFD address is repeated. Please reselect the address |
|
|
1039 |
Code or network beyond executable area. Please clear them |
|
|
1040 |
Functional code CALL or SP is wrongly used. Correspondence between CALL
and SP or between SP and SPE is wrong. SP functional code is used again
between SP and SPE or SP is set before using END2 |
|
|
1041 |
Level conducting line in parallel with node network |
|
|
1042 |
PLC system parameter file is not loaded |
|
|
|
|
|
|
|
|
|
