With automatic grinding wheel and automatic compensation function;

Menu-style interface input.

 

solution

Configure user-defined graphic parameter interface;

Use external encoder to feedback the position signal of the table;

Support grinding wheel feed mode automatic or hand pulse selection;

Support grinding wheel circulation mode: Z-direction circulation and Y-direction circulation.

 

 

 

Application effect

Dual-channel function, can support single gantry (single column), double gantry synchronous control;

Professional development with simple and clear graphical operation interface, which can set processing parameters and monitor external information of the machine tool in real time, with early warning function;

Improved-hydraulic control + encoder detection: reduce the use of travel switches, through structural protection and other measures, the encoder feedback position signal is more stable;

Reversing does not require manual adjustment of the switch position, only the reversing coordinates are entered on the interface, and the operation is simple;

The worktable speed is convenient to adjust, and the sensitivity is higher than that of single hydraulic control.