GSK RH06 welding robot for carriage w

Automatic fixture positioning and clamping of the workpiece, robot replaces manual welding;

The scope of the fixture to the workpiece: 1400 mm <= length <= 3255 mm, 400 mm <= width <= 800 mm;

All workpieces can be welded in a range of more than 93% of the weld can be welded normally without interference.

solution

The welding station solution using two single-axis positioners and one robot, because the workpiece to be welded is relatively long, the robot needs to add a linear ground track;

The workpiece is ordered by the customer, and the worker transfers it to the automatic welding fixture by air;

The fixture automatically clamps and positions the workpiece, and one RH06 welding robot welds the workpiece after clamping and positioning;

At the same time, the worker can carry out the loading and unloading operation on the other side, and this cycle.

Application effect

The welding station solution using two single-axis positioners and one robot, because the workpiece to be welded is relatively long, the robot needs to add a linear ground track;

The workpiece is ordered by the customer, and the worker transfers it to the automatic welding fixture by air;

The fixture automatically clamps and positions the workpiece, and one RH06 welding robot welds the workpiece after clamping and positioning;

At the same time, the worker can carry out the loading and unloading operation on the other side, and this cycle.

GSK RH06 welding robot for carriage welding