Init DSP faile

Init DSP faile

How to solve Init DSP faile on GSK218MC-H, GSK218MC-V and GSK218MC?

1. Please unzip the files in the compressed package and copy the res folder to the U disk.

2. Press and hold the reset button on the 218MC system keyboard, then power on the system

3. Release the reset button until the display shows "Please Input Enter Password: "

4. Please enter the password: "218M", press the "Enter" key to enter.

5. After entering the password, enter the upgrade screen, and insert the U disk into the USB interface of the system.

6. At this time, please press the leftmost button "USB:" at the bottom of the display to enter the USB interface.

7. Select "res" in the USB interface, and press "Enter" to enter this directory.

8. At this time, please press the "PROG" soft key of the rightmost key at the bottom of the display to transfer the file.

9. Then press the "Enter" key of the system keyboard to confirm

10. Until the system prompts: "copy succeed!", please power on the system again.

This upgrade will not affect parameters and ladder diagrams

If the phenomenon persists after the upgrade, it means a hardware failure, and the system motherboard needs to be updated