Instead of manual handling, the robot feeds and unloads one bone-making machine, one plastic machine, and one beer hole machine.

The claw needs to adapt to the workpiece with a diameter of 182mm to 200mm and a thickness of 0.25mm.

 

 

02

solution

 

1 RB08A3 handling robot, sucking the round tube blank with suction cup, after the bone is completed, the rigidity of the workpiece is enhanced, and then the cylinder is used to grab;

The robot gripper integrates the functions of suction cup suction and cylinder clamping. The suction cup sucks the rough and poor consistency of the rough, the cylinder grabs the process parts with good rigidity and good consistency, and adjusts the air pressure and the cylinder clamping stroke. Ensure that the workpiece does not damage the workpiece.

 

 

03

Application effect

 

Robot replaces manual, can work 24 hours at any time, and steadily complete work tasks;

By controlling the air pressure and adjusting the holding force, the deformation of the workpiece during the grasping process can be well avoided;

The robot replaces the manual, reduces the inconsistency of the workpiece caused by human operation, and facilitates the next process.