01Application of VMC850C with GSK25i CNC system film blowing machine film head processing

 

 

 

It can process the film head of the blown film machine. The maximum diameter should be 400. I hope that one device can make a series, and the funds are insufficient. I hope to choose the economical equipment.

 

 

 

 

 

 

solution

 

 

 

It is recommended that Yunnan VMC850C (hard rail, column heightening) is equipped with GSK25i control system, and CNC-320R CNC indexing head is added;

Features of the machine:

Three-axis hard rail, good rigidity and large bearing capacity;

The Z-axis travel is increased to 700, and the height is suitable after the CNC indexing head is installed;

The internal space of the sheet metal is also large enough to facilitate the installation of materials;

This machine is a 850 model heightened, the price is not expensive, within the customer's budget.

Because the 850 Lijia worktable is not big enough, adding two thicker plates on both sides of the worktable not only increases the NC indexing head, but also solves the problem of the worktable not being long enough.

 

 

 

 

 

 

Application effect

 

 

The customer is satisfied with the finished product after modification, and the cost performance is high;

The accuracy and smoothness of the membrane head processed after being put into use are very satisfactory to customers.

 

 

02

Application of Baojia V6c machine tool with GSK 25iMb-V CNC system machining center automation equipment mechanical parts processing

 

 

The machining accuracy of shape and position tolerance can be guaranteed within 0.02mm, and the machining accuracy of bearing position is guaranteed within 0.01mm;

The surface finish of shape and position requires 1.6 and the bearing position is 0.8.


 

 

 

solution

 

Use Baojia V6c machine tool with GSK 25iMb-V system processing center processing automation equipment mechanical parts;

The materials of the workpieces processed by customers are mostly soft materials. The cutters are made of ordinary alloy cutters, and the remaining 0.1-0.15mm after roughing. Direct finishing can complete the machining once and improve efficiency;

The tapping is generally M6 metric teeth, using the center drill to hit the point, and the M6 ​​tap is used to complete the tapping after the 5mm drill bit makes the hole.





 

 

 

 

Application effect

 

 

 

After processing various workpieces, the accuracy of drilling and tapping meets the requirements of customers.




 

 

 

 

03

VMC850L machining center with GSK 25i/GH CNC system

Application of main body processing of sanitary valve core

 

 

 

 

The Anhui Wannan VMC850L machining center is used with the GSK 25i/GH system to process the main parts of the faucet.

 

solution

 

 

 

According to the customer's parts, install the fourth axis turntable with bridge hydraulic clamping processing program;

Recommend and use reliable machining tools and fixtures;

Continuous processing of multiple workpieces is normal and can be mass produced;

After production and processing parts inspection can meet customer requirements.

 

Application effect

 

Processing efficiency meets customer needs.