Robots replace manual handling, loading and unloading 1 bone machine, 1 shaping machine, and 1 punching machine.

The gripper needs to be adapted to workpieces with a diameter of 182mm to 200mm and a thickness of 0.25mm.

 

 

02

solution

 

One RB08A3 handling robot uses a suction cup to pick up the round tube blank, and the rigidity of the workpiece is increased after the bone is finished, and then the cylinder is used to grab it;

The robot gripper integrates the functions of sucker suction and cylinder clamping. The sucker sucks the blank with poor rigidity and poor consistency, and uses the cylinder to grab the process parts with good rigidity and good consistency. It can be adjusted by adjusting the air pressure and cylinder clamping stroke. Ensure that the workpiece does not damage the workpiece.

 

 

03

Application effect

 

Robots replace humans and can work 24 hours a day to complete tasks stably;

By controlling the air pressure and adjusting the holding force, the deformation of the workpiece during the grasping process can be well avoided;

Robots replace labor, reduce the inconsistency of workpieces due to human operations, and facilitate the next process.