RMD08 four-axis robot

Use 3 Guangzhou CNC RMD08 four-axis robots, cooperate with two punches and automatic feeders;

Requires 7 seconds to punch a piece;

The robot must cooperate with the punch to stably load and unload for a long time.

solution

Develop automated processes based on customer parts;

Recommend reliable and suitable workpiece fixtures;

Each process is debugged to meet design requirements;

Multi-process can continuously run normal batch production;

After mass production, stamped parts can meet customer requirements.

GSK

Application effect

With the feeding rack and robot, the stamping time is 6.5 seconds / piece.