People in the machinery industry, especially those who do machining, need to be proficient in using various fixtures. Today I will tell you about ten commonly used fixtures! ! Have you used it all?

 

Tenth place: dividing head

 

The scenery that used to be so declining now. It's all caused by the indexing spindle. So please rank tenth.

Ninth place: pneumatic cylinder fixture

 

 

The essence of automatic clamping fixture. Among the many fixtures, laborers should like the pneumatic fixture the most.

Eighth place: Spring collet

 

 

 

How can tools with a wide range of chuck specifications use fewer handles to solve the clamping problem? Here you can find the answer.

Seventh place: Magnetic platform

 

 

How to more easily place the parts without clamping positions on the workbench for you to process? See how he did it?

Sixth place: spindle and tool holder

 

 

 

 

The spindle and tool holder are the crystallization of human top wisdom and cutting-edge technology.

Fifth place: Vise; with his brother Max

 

 

 

 

For workpieces that cannot be pressed by the pressing plate, consider using a vise/max for clamping.

Fourth place: EROWA fixture

 

 

 

It can guarantee the repeat positioning accuracy of /-0.002mm. The electrode will not work without it; the four-axis machining will not work without it; the five-axis machining will not work even without it.

Third place: the combination of T block, screw, pressure plate and nut

 

 

 

 

 

Your other fixtures do not have the combination of T-block, screw, pressure plate and nut, it is difficult to install it on the machine tool (for milling machines, machining centers). If you don't believe it, just try it.

Second place: T-shaped workbench

 

 

 

 

Don't look at him usually inconspicuous. If you find that your machine does not have a T-type table, you will be at a loss.

First place: chuck

 

 

  The century-old fixture is still busy in the mechanical workshop. Its classic degree is self-evident. There are more chucks than lathes in the workshop. If there is no chuck, the lathe will not work.

These are the ten most commonly used fixtures. See you later, but you need to know! !