The GSK980TDi lathe CNC system is a popularized CNC system based on GSK-Link bus counting. It is equipped with a bus-type servo drive unit and a servo motor with a multi-turn 17-bit absolute encoder.

The rapid traverse speed can reach 100000mm/min, the cutting feed speed can reach 15000mm/min, the maximum can control 5 axes, can realize 5-axis 5 linkage linear interpolation, 2-axis arc (including three-point arc interpolation), Thread, ellipse, parabola, cylinder, polar coordinate interpolation, thread repair, torque control. Support 0.1um input/output, adapt the servo spindle to realize continuous spindle positioning, rigid tapping, rigid thread processing, with broken loop diagnosis, regular maintenance, polygon processing, machine tool fault diagnosis, secondary interface development, machine tool function debugging, assistance Programming, track preview, MPG trial cutting, tool life management, automatic tool setting, statement macro instruction, PLC axis control and other functions. Support dual-spindle control, workshop network management, etc.

 

 

 

 

 

Torque control

The motor at the end of the tailstock controls the extension and shortening of the thimble, and uses the specified torque and chuck to control the balance of the workpiece.

 

Torque control controls the motor to rotate at a certain speed and a certain torque as the termination condition of the rotary motion. When the motor reaches the required torque, the current torque is maintained to make the motor dynamically balance with the external force in the direction of rotation , Can be used for workpiece docking between the spindle, tailstock control.