Change ZJY265A-15BM-B5 to ZJY265A-18.

CNC User:

Dear Sirs,

Kindly, we need to replace a spindle servomotor by a new one on a GS3000 drive.

Which parameters should we change?

Check below info and photos.

Should we also change anything on the GSK 218MC controller screen ?

Drive : GS3150Y-NP2

Old motor : ZJY265A-15BM-B5

New motor : ZJY265A-18.5BM-B5A2Y1

CNCmakers Support:

Please change GS3150Y-NP2 parameter PA1=630

Then do EE-DEF procedure.

User:

Kindly, we noticed some difference between the encoder pulse on the two servomotors.

Should we change another parameter also ?

Old motor : encoder 1024 p/r

New motor : encoder 5000 p/r

CNCmakers Support:

No need to change other parameters.

CNC User:
We tried to change parameter PA1=630 but the maximum permitted value is 546
What should we do?

CNCmakers Support:
It should be old version of the GS3150Y-NP2, you need to change GS3150Y-NP2 PA1=530, then change PA0 to 8888, then change PA176=5000. EE-SET to save, restart the power.

Change ZJY265A-15BM-B5 to ZJY265A-18.5BM-B5A2Y1