GSK218MC-V CNC User:

We have a problem.

When finishing 3D milling (according to the program) of the surface, a difference in the Z axis (approximately 0.1 - 0.2 mm) is obtained, more precisely, when the Z direction changes upward and downward or vice versa.

We decided that the problem was backlash, since we had already insisted on it on other machines and solved this problem.

On your system, we do not know which parameter is responsible for this. We have already tried changing the parameters, but all without changing.

Please ask your specialist engineers to write how and where to change (adjust) to remove the backlash along the Z axis.

On the X and Y axes, everything works fine with an accuracy of up to 0.01mm.

I will look forward to hearing from you.

 

CNCmakers Support:

You can adjust Data Parameter No.190.