| Our indexers utilize a worm and worm wheel type indexing. It is an ideal accessory for NC milling machine, NC boring machine and machining center as well as for semi-automatic precision milling machine, boring machine and etc. It is designed by applying air pressure(or hydrautic) to clamp or unclamp the spindle. Matched with NC control box.servo motor and encoder, high accurate indexing to any desired angles can be done. |
| This indexer spindle utilizes a standard register taper. With the aid of face plate chuck, 5c or 3j collets and tailstock, indexing and cutting for different kinds of workpieces such as long bars or shaftes can be realized. |
| ITEMS |
FK14160D |
FK14210A |
| CENTER HEIGHT MM |
160 |
210 |
| DIAMETER OF FACE PLATE MM |
Ø200 |
Ø315 |
| T-SLOT WIDTH ON FACE PLATE MM |
10H10 |
14H10 |
| ANGLE OF T-SLOT IN THE TABLE SURFACE |
90º |
90º 45º |
| DIAMETER OF CENTERING BUSHING MM |
Ø25H7 |
Ø30H7 |
| DIAMETER OF INDEXER TRAM BUSHING MM |
Ø10H7 |
Ø15H7 |
| WIDTH OF LOCATING KEY MM |
18 |
22 |
| CONNECTING DIMENSIONS OF THE SPINDLE NOSE |
5 inch nose |
8 inch nose |
| COLLET |
3J |
- |
| TOTAL REDUCTION RATIO |
1:180 |
1:180 |
| AIR (HYDRAULIC) PRESSURE PA |
5x105 |
5x105 |
| SERVO POWER KW(Nm) |
0.8(6) |
1.1(12) |
| TANGENT MAX TORQUE Nm |
300 |
380 |
| RAPEATABILITY ACCURACY |
5'' |
5'' |
| DIVIDING ACCURACY |
30'' |
30'' |
| MAX SPEED R/MIN |
11.1 |
11.1 |
| GROSS WEIGHT KG |
147 |
280 |
| NET WEIGHT KG |
132 |
260 |
| AIR (HYDRAULIC) INLET |
Z1/4'' |
Z1/4'' |
| MAX WORKLOAD KG |
120 |
175 |
