Motion control

Controllable axes: X, Z, Y; simultaneous controllable axes (interpolation axes): 2 (X, Z)

Interpolation: X, Z linear, arc interpolation

Maximum programmable dimensions: -9999.999 mm～9999.999mm, least command increment 0.001mm;

Electronic gear：command multiply 1～32767 and command division 1～32767

Rapid traverse speed: max. 30000mm/min

Rapid override: F0，25%，50%，100%

Cutting feedrate: max.15000mm/minor 500mm/rev(feedrate per rev)

Feedrate override: 16 steps 0～150%

Manual feedrate: 16 steps 0～1260mm/min

MPG feedrate: 0.001mm，0.01mm，0.1mm

Acceleration/deceleration: S acceleration/deceleration for rapid traverse, and exponential acceleration/deceleration for cutting feed

Automatic chamfering function

G

command

43 G commands: G00, G01, G02, G03, G04, G05, G6.2, G6.3, G7.2, G7.3, G10, G11, G20, G21, G28, G30, G31, G32, G33, G34, G36, G37, G40, G41, G42, G50, G65, G70, G66, G67, G71, G72, G73, G74, G75, G76, G90, G92, G94, G96, G97, G98, G99, macro command G65 to execute 27 kinds of calculation, logic operation and program skipping

Thread machining

Tapping: metric/inch, single/multiple, straight thread, taper thread, end face thread, variable pitch thread. Thread run out with set retraction distance, angel and speed; pitch: 0.001mm～500mm or 0.06～25400 tooth/ inch

Spindle encoder: lines can be set （100 p/r～5000p/r）

Drive ratio between encoder and spindle: （1～255）：（1～255）

Precision compensation

Backlash compensation: 0mm～2.000mm

Pitch error compensation: 255 compensation points/axis, compensation

value/point:±0.255mm×compensation override

Tool compensation: 32 groups tool length compensation, tool nose radius compensation (tool compensation C)

Toolsetting method: fixed-point, trial cutting

Tool compensation executing methods: traversing tool or coordinate offset

M

command

M commands(no repetition): M02, M30, M98, M99, M9000～M9999

Other M□□ commands are defined and executed by PLC programs

M commands defined by standard PLC program: M00, M03, M04, M05, M08,

M09, M10, M11, M12, M13, M32, M33, M41, M42, M43, M44

T

command

Most 32 tool selections（T01□□～T32□□）, the time sequence of tool change is defined by PLC programs. The tool selection is set to 1 and the tool change is not executed by PLC when the line-up tool post is used; tool life management.

Spindle speed

Speed switching value control: S□□ command is defined and executed by PLC programs, S1, S2, S3 and S4 is specified by standard PLC programs directly output, and S0 closes S1, S2, S3, S4 output.

Speed analog voltage control: S commands specifying the spindle speed per minute or the cutting surface speed (constant surface speed control) , 0～10V voltage to spindle converter, 4 gears spindle speed with stepless shifting gear

PLC

function

9 elementary commands, 23 functional commands, 2-level PLC program, max. 5000 steps, execution time 2μs for each step, refresh cycle 8ms for 1^st level program; each axis specified to be PLC controlled axis; ladder diagram editing software, PLC program communication download

PLC

function

Integrated machine control panel: 41 input points (press keys), 42 output points (LED)

I/O interfaces: 16 input points /16 output points, up to 32 input signals/32 output signals

Displaying window

Display: 480×234 lattice, 7” color wide-screen liquid crystal display(LCD)

Display method: Chinese or English or Spanish or Russian window is set by a parameter, displaying machining path of workpiece

Program edit

Program capacity: 6144KB, max. 384 programs, customer macro program cal and four-embedded subprogram

Editing method: edit in full screen. Statement macro command programming; incremental coordinates, absolute coordinate and compound coordinates programming

Communication

Two-way communicating programs and parameters between CNC and PC, CNC and CNC; communication upgrade, PLC programs serial download upgrade

Optional drive unit

DA98 series digital AC servo drive unit or DY3 series stepper drive unit with input pulse and direction signal