GSK988Ti GSK988Ti-H TURNING CENTER CNC CONTROLLER
With GSKLink bus technology, GSK988Ti and GSK988Ti-H from CNCmakers are new CNC controllers for slant bed CNC lathe and turning center,
adopt micro processor of 400MHz high performance, and it can control five feeding axes (including C axis), two analog spindles,
real-time communication between GSKLink serial bus and servo unit, the adapted servo motor adapts
encoder of absolute type in high resolution, realize position of 0.1um, and satisfy the requirements of
combined processing of turning and milling in high precision. GSK988Ti and GSK988Ti-H is equipped with internet interface,
and it supports remote monitor and file transmission and satisfies the requirements of internet education
and workshop management. GSK988Ti and GSK988Ti-H are the best choice for slant bed CNC lathe and turning center.
Thread function
l Common thread (following the spindle)/ rigid thread.
l Single-headed/multiple thread of straight, taper and terminal surface in metric system/inch system
, equal and variable pitch thread.
l Thread retraction length, angle and speed characteristics can be set.
l Thread pitch: 0.01mm~500mm or 0.01inch~9.99inch.
Acceleration and deceleration function
l Cutting feeding: Linear type or index type is selectable.
l Rapid traverse: Linear type.
l Thread cutting: Linear type or index type is selectable.
l The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.
Spindle function
l Analog voltage 0V~10V output in two channels, spindle encoder feedback in two channels and two-spindle control.
l Spindle speed: it is set by S code or PLC signal, the speed range is 0rpm~20,000rpm.
l Spindle override: Total 8 levels: 50%~120%, real-time adjusting.
l Spindle constant surface speed control.
l Rigid tapping.
Tool function
l Tool length compensation.
l Tool wearing compensation.
l Tool nose radius compensation (C type)
l Tool life management.
l Methods of setting tools: Tool-setting in fixed position, trial cutting tool-setting, return to reference point for setting tool
l Tool offset mode: Rewriting coordinate mode, tool traverse mode
Precision compensation
l Backlash compensation
l Pitch error compensation in memory type
PLC function
l 13 types of basic commands, 30 types of function commands
l PLC ladder diagram edit on-line, real-time monitor
l PLC program in two levels, maximum 5,000 steps, the refresh cycle of the 1st level program:8ms
l Support PLC warning and PLC alarm
l Support many PLC programs (maximum 16), the current running PLC program can be selected by parameter
I/O unit
l Basic I/O: Input in 40 points/output in 32 points
l Operation panel I/O: input in 96 points/output in 96 points
l I/O extension: Use GSKLink for extension, the maximum is to extend two I/O ports, each input in
16 points/output in 8 points
Man-machine interface
l Display in Chinese and English, etc.
l Display in two-dimensional tool path and stereogram
l Servo state monitor
l Servo parameter configuration on-line
l Real-time clock
l Help on-line
Operation management
l Operation mode: Auto, manual, edit, MDI, DNC, MPG and reference point return
l Operation authority of multiple levels management
l Alarm record
l Ime turn off
Editing program
l Program memory capacity: 25M, 10,000 programs (including subprograms, macro programs)
l Editing function: Edit in full screen, support the background edit of part program
l Editing function: Program/block/character research, rewriting, deleting, block copy/block deleting
l Program format: ISO codes, it supports the commands without space and hybrid programming of
relative coordinate and absolute coordinate
l Macro command: Support macro command programming in sentence type
l Calling program: Support the macro program calling with parameter and subprogram nesting of 12 layers
l Grammar check: Check grammer after editing the programs.
Communication function
l RS232: Transmit the files of part program and parameter, etc, DNC processing, support PLC program
and software serial port upgrade.
l USB: File operation, directly process files and support PLC programs in flash disk and software flash disk upgrade.
l LAN: Remote monitor, internet DNC processing, file transmission, support PLC program and remote software upgrade.
Safety function
l Emergency stop
l Hardware travel limit
l Travel limit in many memory types
l Data restoring and recovering
List of G Codes
Communication Software PLC and Ladder Diagram Editing Software
The communication software GSKComm and PLC ladder diagram editing software GSKLadder of GSK988Ti
are all run in WINDDOWS98 /2000/XP. User can edit part program on PC, upload and download files of
part program, parameter, tool compensation and thread compensation, etc between PC and CNC,
as well as DNC real-time processing. The machine manufacturer can edit the ladder diagram on
GSKLadder of PC, upload and download PLC program between PC and CNC also. |
 |
| Products Catalogue | Home | About Us | Retrofit | Download | News | Tech Support | Contact Us | |
|
|
|
 |
