|
|
|
K1000TII
K1000TII is a superior turning machine CNC system with high performance 32-bit microprocessor, new structure design and open PLC process. It is employed with 8.4 inch color LCD display. It can control 4 feeding axes, 4 simultaneously controlled axes. It can be matched with KND or YASKAWA Digital AC servo driver. K1000TII is suitable for full function CNC Turning Machine.
l Adopt 32-bits powerful CPU to achieve high-speed, high-precision control. The maximum speed reaches up to 30 m/min
l 7.5/8.4 inch TFT LCD with the resolution of 640×480.
l Six layer main board applying custom-build FPGA, high integration technology, perfect structure design ensures that the system has high reliability and high anti-interface capability.
l Support the open-style PLC function to meet the secondary development of the machine tool builder.
l Two types of machine control panels including the standard panel with film-buttons and one with pushed buttons are available. On the later one the functions of the 50 pushed buttons and 50 lamps are able to defined by customs.
l Remote I/O modules based on CAN bus can be use to extend the number of I/O points up to 512/512.
l Chinese operation interface and full help information make the operation more conveniently.
l Perfect self-diagnosis function. Display the internal and external states in real time and alarms will be issued timely when some abnormity happen.
l Powerful instruction execution ability to achieve the high-speed, small-line-section machining
l 640 kB internal program memory space. U-disk port can be use to extend the space of program and to perform DNC machining.
l Rich NC functions: macro program B, rigid tapping, local coordinate system, coordinate system rotation, coordinate scaling, polar coordinate system, etc.
|
Function
|
Specification
|
Function
|
Specification
|
|
NC axis number
|
2 axes (X, Z)
|
English and metric unit exchanging
|
Provided
|
|
Interpolation axis number
|
2 axes (X, Z)
|
Communication
|
RS232
|
|
Interpolation
|
Linear interpolation
arc interpolation
|
|
Least setting unit
|
0.001 mm or
0.0001 inch
|
Remote control
|
Transmitting PLC program, machining program, parameters, etc.
|
|
Largest command dimension
|
±99999.999 mm
|
U-disk interface
|
Provided
|
|
Maximum rapid traverse rate
|
30000 mm/min
|
Macro program
|
Provided
|
|
Maximum feed rate
|
15000.000 mm/min
30000 mm/min (optional)
|
Emergency stop and stroke limit
|
Standard PLC program supports three emergency stop signals. Both stored stroke limit and hardware stroke limit are available.
|
|
Feed rate override
|
JOG/AUTO: 0～150%
|
Alarm
|
PS alarm, Servo driver alarm, Exceed stroke limitation alarm, System error alarm, External alarm
|
|
Program memory space and electric disk
|
640 kB/128/3
640 kB/512/3(optional)
|
Acceleration/deceleration control
|
Linear and exponential type control
|
|
Interface
|
7.5/8.4 inch TFT LCD
|
Reference position return
|
Provided
|
|
Revolution: 640×480
|
Electrical gear ratio
|
1~127, 1~127
|
|
Additional interface
|
Additional panel, Independent operation box
|
Machine control
|
Machine lock
Feed hold
Block skip
|
|
Display
|
Coordinate value, machining time, workpiece count, date, feed rate, etc.
|
Feed control
|
AUTO, JOG, STEP, HANDLE
|
|
Graphic function
|
Tool path displaying
|
DI/DO
|
DI: 40 DO: 24
DI/DO points can be extended by CAN bus
|
|
PLC
|
Open-style PLC
|
Driver
|
Digit AC servo driver
|
|
Tool compensation
|
Tool length compensation
Tool tip radius compensation
|
Measuring function
|
Provided
|
|
Backlash compensation
Pitch-error compensation
|
Provided
|
Canned cycle
|
Provided
|
|
Spindle function
|
Gear shifting control
Analog spindle control
Rigid tapping control
|
Thread cutting
|
Straight thread, cone thread, end-face thread, variable-pitch thread
|
|
Miscellaneous functions
|
Control the spindle rotation, coolant, lubrication, in JOG /MDI /AUTO mode
|
Diameter/Radius programming
|
Provided
|
|
Feed per minute
Feed per revolution
|
Provided
|
|
Program
|
Absolute / incremental mixture programming. Decimal point function in programming
|
Constant surface speed control
|
Provided
|
|
Workpiece coordinates
|
G54~G59
|
Tool length compensation
|
16
|
|
Subprogram calling function
|
Provided
|
Tool control
|
Controlled by PLC
|
|
|
|
|
