Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Products > CNC Lathe >

CK7625 CNC Lathe Machine


Capacity Max.swing diam.over bed mm 250
Max. length of workpiece mm 250
Max.swing diam.over drag board mm 90
Max.diam.of through -hole Hydraulic chuck mm 35
Collet mm 35
Chuck size inch 6
Spindle speed rpm 300-3500
Main motor power KW 4
Feed Travel X-axis mm 380
Z-axis mm 400
Turret Type of turret / Tool post
No.of tool nos 4--7
Others Overall dimension(L×W×H)) mm 2050×1150×1650
Net weight(Approx.) kg 1850
Design and Specifications are subject to change without prior notice.



CNC controller system:
GSK980TDb or GSK988T with DA98A/SJT AC servo motor driver
DAP03/ZJY AC Servo Spindle Motor Driver


*Standard Accessory:Hydraulic collet,Lighting device,Indicator light,Assorted tools and

 User Guide.

*Optinal Accessry:Hydraulic collet,Automatic feeder.

*With slant bed ,the machines are characterized by features of easy chip emission,

 convenient operation,full protection,leakage free as well as attractive out-looking.

*With easy load and unload,the machines have rooms for robots to be installed .

*With resincasting bed,the machines are high in rigidity and vibration-proofing.

*With high speed ,the machines can have high speed cutting for high productivity.

*With hydraulic-driven spindle chuck and cycling oil tanks,this CNC machine has

 higher automation.

*precision rolling linear guideways are used in X and Z direction,bed saddle driven

 part is in the middle of the machine,it drives easily and do not produce side torque.

*32×10 Precision Ball Screws are used in X and Z directions,with direct connection

 between large diameter ,the pitch,Screw straight are connected with the serve

 motor,transmission is concise and accurate.

*This machine is suitable for large quantity cutting of disk parts,sleeve and short-axis

  type products,inner and outside thread surface cone and sphere surface.

*The lathe is suitable for large quantity cutting of disk parts, sleeve and short -axis

  type products, inner and outside thread surface, cone and sphere surface.


—[Close]— —[ Back]— —[ Print]—