DA98A AC Servo Motor Drivers amplifiers

DA98A AC Servo Motor Driver

With high cost-performance and wide application, DA98A AC Servo drive unit is integrated the single-axis motion control function.

Pulse command and analog command input, position feedback output and many I/O interfaces defined by customer to match with all kind of open-loop or closed-loop controller to realize the position open-loop or speed closed-loop controller;

Integrated the single-axis control function without the command control unit to realize the automatically completing the single-axis cycle motion and I/O control with the high cost-performance, and widely applied to the automation field;

Simple and active single-axis command system to avoid the mistake the programming phrasing.

MODEL	DA98A- 10	DA98A- 13		DA98A- 15	DA98A- 23	DA98A- 25	DA98A- 39
Output power (KW) *	1.0	1.3		1.5	2.3	2.5	3.9
Suitable motor (SJT series)	110SJT- M040D			110SJT- M060D
	130SJT- M040D	130SJT- M050D		130SJT- M060D	130SJT- M150B	130SJT- M100D	130SJT- M150D
Input power	Single phase or 3 phases AC （0.85~1.1）×220 V 50Hz/60Hz				3 phases AC （0.85~1.1）×220 V 50 Hz /60Hz
Working condition	Temperature: working: 0~55℃ storage: -20℃~80℃ Humidity: less than 90% (no dew) Vibration: less than 0.5G (4.9m/S2), 10Hz~60Hz ( no continuous run)
Control mode	①position control ② speed control ③ speed dry run ④ JOG run
Rebirth brake	Inner
Control characters	Speed frequency response: not less than 200Hz
	Speed fluctuation: <± 0.03 (load: 0~100%); <±0.02 (power: -15~+10%) (value corresponding to rated speed)
	Speed ratio: 1:5000
	Pulse frequency: ≤500kHz
Control input	①servo enable ② alarm release ③ CCW drive forbid ④ CW drive forbid ⑤ warp counter cleanup/ speed select 1 ⑥ dictate pulse forbid/speed select 2 ⑦ CCW torque limit ⑧ CW torque limit
Control output	①servo prepared output ② servo alarm output ③ positioned output/ speeded output
Position control	Input mode		①pulse + direction ② CCW pulse/ CW pulse ③ 2 phases A/B quadrature pulse
	Electric gear ratio		1~32767/1~32767
	Feedback pulse		10000 pulse/rotation
Speed control	4 kinds inner speed
Shifting function	Parameters setting shifting time: 1ms~10000ms (0r/min-1000r/min)
Monitoring function	Rev, current position, dictate pulse accumulate, position warp, motor torque, motor current, linear speed, rotor absolute position, dictate pulse frequency, running state, I/O terminal signal and so on.
Protection function	Overspeed, main power overvoltage/ undervoltage, overcurrent, overload, brake abnormity, encoder singularity, control power unconventionality, position warp, etc
Display, operation	6bits LED, 4 buttons
Suitable load inertia	Less than 5 times of the motor’s inertia
Weight	2.8 Kg
Oversize	244mmx163mmx92mm (see the figure)

Following are the matching motor and specifications:

Each unit includs 1 AC Servo Motor and 1 Motor Driver.

DA98A-15-130SJT-M100B

Incl. 1500W, 10NM, 1500rpm, 6.0A, 130mm support AC Servo Motor

DA98A-25-130SJT-M100D

Incl. 2500W, 10NM, 2500rpm, 10A, 130mm support AC Servo Motor

DA98A-23-130SJT-M150B

Incl. 2300W, 15NM, 1500rpm, 8.5A, 130mm support AC Servo Motor

DA98A-39-130SJT-M150D

Incl. 3900W, 15NM, 2500rpm, 14.5A, 130mm support AC Servo Motor

DA98A-27-175SJT-M180B

Incl. 2700W, 18NM, 1500rpm, 16.5A, 175mm support AC Servo Motor

DA98A-45-175SJT-M180D

Incl. 4500W, 18NM, 2500rpm, 18A, 175mm support AC Servo Motor

DA98A-33-175SJT-M220B

Incl. 3300W, 22NM, 1500rpm, 19A, 175mm support AC Servo Motor

DA98A-55-175SJT-M220D

Incl. 5500W, 22NM, 2500rpm, 22A, 175mm support AC Servo Motor

DA98A-45-175SJT-M300B

Incl. 4500W, 30NM, 1500rpm, 26A, 175mm support AC Servo Motor

DA98A-75-175SJT-M300D

Incl. 7500W, 30NM, 2500rpm, 30A, 175mm support AC Servo Motor

BRAKE FUNCTION* Optional, For AC servo motors Torque>15NM

BRAKE FUNCTION* Optional, For AC servo motors Torque less or equal to 15NM

Because the old versions of DA98A already stop production.
So DA98A-10, DA98A-13, DA98A-15, DA98A-23, DA98A-25 and DA98A-39 are not available any more.

But we can use new DA98A models as below to replace them.
DA98A-10 and DA98A-13 can be replaced with DA98A-20.
DA98A-15 can be replaced with DA98A-30.
DA98A-23 and DA98A-25 can be replaced with DA98A-30*.
DA98A-39 can be replaced with DA98A-50.

User Manual Download:

DA98A_AC_Servo_Driver_User_Manual.rar

CNC Retrofit Kit:

http://www.cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html